The ALARM OUTPUT selection switch offers the user to select the type of alarm signal, which is initiated at the end of each countdown cycle:

• Visual output / Blinking LED
• Audio output / Beeping (40-50dB)
• Visual and Audio output combined

All other functions of the timer are associated with the additional three buttons:

• MIN [Minutes]
• SEC [Seconds]
• START/STOP

Operation of the Countdown Timer:

• To set the time, MIN and SEC buttons are pressed to display the total time duration.
• Then the START/STOP button is pressed and the countdown will be initiated.
• Countdown function active…..
• Countdown reaches to “00-00” and ALARM is activated
• By pressing START/STOP, the timer will:
  • deactivate the ALARM
  • reset to preset time interval
• By pressing START/STOP again, the original countdown sequence will be initiated.

Additional Notes:

• If the countdown was interrupted (pressing START/STOP), the countdown process will be stopped and the remaining time interval will be displayed on the LCD.
• If the START/STOP button will be pressed again, the countdown will resume.

Resetting the TIME INTERVAL:

• Make sure the countdown function is completed or suspended (pressing START/STOP)
• Press MIN and SEC together Ë the display will show 00-00
• Using MIN and SEC buttons, enter the new time interval

Technical Data:

• Time Range: 00[Min] 01[Sec] Ë 99[Min] 59[Sec]
• Size/Weight: 3x 2-1/4x 5/8 | 75x 55x 15mm (WxLxH) // 2oz | 60gr.
• Battery: Alkaline Cell - GPA76 / 9C