small, battery operated, versatile and simple to use unit suitable
for keeping track of time intervals in the range of 00[Min] 01[Sec]
to 99[Min] 59[Sec].
The ALARM OUTPUT selection
switch offers the user to select the type of alarm signal, which is
initiated at the end of each countdown cycle:
- Visual output
/ Blinking LED
- Audio output /
- Visual and Audio
All other functions
of the timer are associated with the additional three buttons:
- MIN [Minutes]
- SEC [Seconds]
Operation of the
- To set the time,
MIN and SEC buttons are pressed to display the total time duration.
- Then the START/STOP
button is pressed and the countdown will be initiated.
- Countdown function
- Countdown reaches
to 00-00 and ALARM is activated
- By pressing START/STOP,
the timer will:
- reset to
preset time interval
- By pressing START/STOP
again, the original countdown sequence will be initiated.
- If the countdown
was interrupted (pressing START/STOP), the countdown process will
be stopped and the remaining time interval will be displayed on the
- If the START/STOP
botton will be pressed again, the countdown will resume.
Resetting the TIME
- Make sure the
countdown function is completed or suspended (pressing START/STOP)
- Press MIN and
SEC together Ë the display will show 00-00
- Using MIN and
SEC buttons, enter the new time interval
- Time Range: 00[Min]
01[Sec] Ë 99[Min] 59[Sec]
- Size/Weight: 3x
2-1/4x 5/8 | 75x 55x 15mm (WxLxH) // 2oz | 60gr.
- Battery: Alkaline
Cell - GPA76 / 9C